Glove Box Removal/Installation

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service.

1. Remove the bolts.
   Fig 1: Dashboard Bolts With Torque Specifications

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. While holding the glove box (A), release the glove box stop (B) on each side from the dashboard by pushing them in, then remove the glove box.
   Fig 2: Releasing Glove Box Stop

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Install the glove box in the reverse order of removal.