FixVault
Home › Acura › 2009 › CSX Base, Standard › Repair and Diagnosis › Engine Performance › System › Electronic Throttle Control System › Accelerator Pedal Module Removal/Installation › Removal/Installation (K20Z2 engine)

Removal/Installation (K20Z2 engine)

  1. Disconnect the APP sensor connector (A).
    Fig 1: APP Sensor Connector And Accelerator Pedal Module With Torque Specifications
    G06265863Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the accelerator pedal module (B).
    NOTE: APP sensor is not available separately. Do not disassemble the accelerator pedal module.
  3. Install the parts in the reverse order of removal.
About FixVault