GPS Antenna Removal/Installation
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Put on gloves to protect your hands
- Take care not to scratch the dashboard and related parts
- Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage
- Pull out the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION )
- Disconnect audio-navigation unit connector J (A)
- Remove the screws and detach the clip, then remove the GPS antenna (B)
- Install the GPS antenna in the reverse order of removal