AM/FM Antenna Amplifier Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

SRS components are located in this area Review the SRS component locations (see COMPONENT LOCATION INDEX ), and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service

Remove the C-pillar trim (see C-PILLAR TRIM )
Disconnect the connectors (A) from the AM/FM antenna amplifier (B) and the AM/FM antenna

Fig 1: Identifying Connectors And AM/FM Antenna Amplifier
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Bolt Specifications: 6 x 1.0 mm, 9.4 N.m (0.95 kgf m, 6.9 lbf ft
Remove the bolt and the AM/FM antenna amplifier
Install the AM/FM antenna amplifier in the reverse order of removal