FixVault

Trunk Light Test/Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the trunk lid
  2. Carefully pry out the trunk light (A)

    Trunk Light 5W 

    Fig 1: Identifying Trunk Light 2P Connector Terminals
    G05988972Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the 2P connector (B) from the light
  4. Check for continuity between terminals No 1 (+) and No 2 (-) There should be continuity If there is no continuity, check the bulb If the bulb is OK, replace the trunk light assembly
  5. Install the light in the reverse order of removal