CKP Sensor Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Raise the vehicle on a lift.
NOTE: Make the vehicle is level, because engine oil will drip out when you remove the sensor.
Remove the CKP sensor cover (A).

Fig 1: Identifying CKP Sensor, Cover, Connector And O-Ring
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the CKP sensor connector (B).
Remove the CKP sensor (C).
Install the parts in the reverse order of removal with a new O-ring (D).
Do the CKP pattern clear/CKP pattern learn procedure (see CKP PATTERN CLEAR/CKP PATTERN LEARN ).
Check for engine oil level, and add more oil if needed.