FixVault
Home › Acura › 2009 › CSX Base, Standard › Repair and Diagnosis › External Pages › Different car › Section 83 (PGM-FI System) › CMP Sensor Replacement

CMP Sensor Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the timing belt (see TIMING BELT REMOVAL ).
  2. Remove the front camshaft pulley (CMP sensor pulse plate) (A).
    Fig 1: Front Camshaft Pulley, CMP Sensor Connector And Back Cover With Torque Specifications
    G06679739Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the CMP sensor connector (B), then remove the back cover (C).
  4. Remove the CMP sensor (A) from the back cover.
    Fig 2: Identifying Back Cover CMP Sensor With Bolt
    G06679740Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the parts in the reverse order of removal. Install the timing belt (see TIMING BELT INSTALLATION ).
  6. Do the CKP pattern clear/CKP pattern learn procedure (see CKP PATTERN CLEAR/CKP PATTERN LEARN ).
About FixVault