Speaker Test/Replacement: Tweeter

Carefully pry the tweeter grille (A) out of the dashboard. Be careful not to damage the tweeter grille and the dashboard.

Fig 1: Identifying Tweeter Grille And Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the 2P connector (B) from the tweeter.
Remove the tweeter speaker from the speaker grille.

Fig 2: Identifying Capacitor
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check the capacitor (A) condition. If any problem is found, replace the tweeter.
Measure the resistance between the tweeter (A) No. 2 terminal and the outside terminal of the capacitor.
There should be about 6 Ω.

Fig 3: Identifying Resistance Between Tweeter Terminal 2 And Outside Terminal Of Capacitor
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the resistance is not as specified, replace the tweeter.