FixVault
Home › Acura › 2009 › MDX › Repair and Diagnosis › Engine Mechanical › Lubrication System › Engine Lubrication › Oil Filter Feed Pipe Replacement

Oil Filter Feed Pipe Replacement

  1. Remove the oil filter (see ENGINE OIL FILTER REPLACEMENT  ).
  2. Remove the oil filter feed pipe.
    Fig 1: Identifying Oil Filter Feed Pipe
    G05484835Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe, and hold one nut with a wrench, then tighten the other nut.
    Fig 2: Identifying Nuts Onto New Oil Filter Feed Pipe
    G05484836Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Tighten the oil filter feed pipe to 49 N.m (5.0 kgf.m, 36 lbf.ft), then remove the nuts from the oil filter feed pipe.
About FixVault