FixVault
Home › Acura › 2009 › MDX › Repair and Diagnosis › Engine Performance › Engine Control Systems › Electronic Throttle Control System › Accelerator Pedal Module Removal/Installation

Accelerator Pedal Module Removal/Installation

  1. Disconnect the accelerator pedal position (APP) sensor 6P connector (A).
    Fig 1: Accelerator Pedal Position (APP) Sensor 6P Connector With Torque Specification
    G05485189Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the accelerator pedal module (B).
    NOTE: The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
  3. Install the parts in the reverse order of removal.
About FixVault