FixVault
Home › Acura › 2009 › RL › Repair and Diagnosis › Accessories & Equipment › Infotainment › Navigation System › Interface Dial Removal/Installation

Interface Dial Removal/Installation

  1. Remove the audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).
  2. Remove the harness cover (A).
    Fig 1: Identifying Harness Cover
    G06163150Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the screws (A) and the jog dial (B) from the interface dial (C).
    Fig 2: Identifying Screws, Jog Dial And Interface Dial
    G06163151Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Disconnect the connector (D), then remove the interface dial.
  5. Install the dial in reverse order of removal.
About FixVault