Motor Test

Remove the seat-back cover (see FRONT SEAT-BACK COVER REPLACEMENT ).
Disconnect the 2P connector from the lumbar support motor (A).

Fig 1: Identifying 2P Connector Of Lumbar Support Motor
Courtesy of AMERICAN HONDA MOTOR CO., INC.

The illustration shows the driver's seat.
Test each motor by applying battery voltage and body ground to the terminals.

Fig 2: Motor Test Terminals Continuity Reference Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, replace it (see FRONT SEAT LUMBAR SUPPORT REPLACEMENT ).