DTC 84: VSA Sensor Neutral Position
- Turn the ignition switch to ON (II).
- Clear the DTC with the HDS (see HOW TO USE THE HDS (HONDA DIAGNOSTIC SYSTEM) ).
- Do the VSA sensor neutral position memorization.
- Test-drive the vehicle.
- Check for DTCs with the HDS.
Is DTC 84 indicated?
YES -Substitute a known-good VSA modulator-control unit then retest. If the VSA modulator-control unit was substituted, go to step 1.
NO -The system is OK at this time. Refer to intermittent failures (see DIAGNOSTIC TROUBLE CODE (DTC) ). Check for loose terminals or poor connections.