FixVault
Home › Acura › 2009 › RL › Repair and Diagnosis › Engine Performance › System › Fuel Supply System › Secondary Fuel Gauge Sending Unit Replacement

Secondary Fuel Gauge Sending Unit Replacement

  1. Relieve the fuel pressure (see FUEL PRESSURE RELIEVING ).
  2. Remove the fuel cap.
  3. Remove the rear seat cushion (see REAR SEAT CUSHION COVER REPLACEMENT ).
  4. Remove the access panel (A) from the right side of the floor.
    Fig 1: Locating Access Panel And Secondary Fuel Gauge Sending Unit 5P Connector
    G06164149Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Disconnect the secondary fuel gauge sending unit 5P connector (B).
  6. Remove the secondary fuel gauge sending unit (A).
    Fig 2: Locating Secondary Fuel Gauge Sending Unit
    G06164150Courtesy of AMERICAN HONDA MOTOR CO., INC.
  7. Remove the fuel gauge sending unit (A).
    Fig 3: Locating Fuel Gauge Sending Unit
    G06164151Courtesy of AMERICAN HONDA MOTOR CO., INC.
  8. Install the parts in the reverse order of removal with a new base gasket (B).
    NOTE: When installing the fuel gauge sending unit, make sure the connection is secure and the connector is firmly locked into place. Be careful not to bend or twist it excessively.
About FixVault