FixVault
Home › Acura › 2009 › TL Base › Repair and Diagnosis › Body & Frame › Door Locks › Immobilizer System › Immobilizer-keyless Control Unit Replacement

Immobilizer-keyless Control Unit Replacement

NOTE: SRS components are located in this area. Review the SRS component locations, precautions and procedures before doing repairs or servicing. See COMPONENT LOCATION INDEX , also see PRECAUTIONS AND PROCEDURES .
  1. Remove the steering column covers (see STEERING COLUMN COVER REMOVAL/INSTALLATION )
  2. Disconnect the 7P connector (A) from the immobilizer-keyless control unit (B)
    3. Fig 1: Identifying Immobilizer-Keyless Control Unit And 7P Connector
    G05989178Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the two screws and the immobilizer-keyless control unit
  4. Install the immobilizer-keyless control unit in the reverse order of removal
  5. After replacement, register the immobilizer-keyless control unit (see IMMOBILIZER KEY REGISTRATION ), and make sure the immobilizer system works properly
  6. Program all of the client's keys/keyless transmitters (see IMMOBILIZER KEY REGISTRATION )
About FixVault