FixVault
Home › Acura › 2009 › TL Base › Repair and Diagnosis › Body & Frame › Door Locks › Keyless Access System › RF Unit 1 Replacement

RF Unit 1 Replacement

  1. Remove the center console panel (see CENTER CONSOLE REMOVAL/INSTALLATION ).
  2. Disconnect the 3P connector (A) from RF unit 1 (B)and remove the harness clip (C).
    Fig 1: Identifying RF Unit 1 3P Connector And Harness Clip
    G06680441Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bolts and RF unit 1.
  4. Install the unit in the reverse order of removal.
About FixVault