Center Console Armrest Replacement

Special Tools Required

KTC trim tool set SOJATP2014 *

* Available through the Acura Tool and Equipment Program, call 888-424-6857

NOTE:

Take care not to scratch the center console or related parts
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components

Remove the center console rear trim (see CENTER CONSOLE REAR TRIM REMOVAL/INSTALLATION )
Gently pull out the console upper trim (A) to detach the clips, and remove the trim, then remove the screws securing the center console (B)

Fig 1: Pulling Out Console Upper Trim To Detaching Clips
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Turn the center console light socket (A) 45° counterclockwise to remove the socket from housing, and remove the screws securing the center console armrest (B)

Fig 2: Identifying Center Console Light Socket And Center Console Armrest
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Pull up the center console armrest (A) and remove it

Fig 3: Identifying Center Console Armrest
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the armrest in the reverse order of removal, and note these items
- If the clips are damaged or stress-whitened, replace them with new ones
- Push the clips into place securely