FixVault
Home › Acura › 2009 › TL Base › Repair and Diagnosis › Engine Performance › System › PGM-FI System › Output Shaft (Countershaft) Speed Sensor Replacement › M/T

Output Shaft (Countershaft) Speed Sensor Replacement: M/T

  1. Raise the vehicle on a lift.
  2. Remove the splash shield.
  3. Disconnect the output shaft (countershaft) speed sensor connector (A).
    Fig 1: Identifying Output Shaft (Countershaft) Speed Sensor With Connector And O-Ring
    G06679744Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the output shaft (countershaft) speed sensor (B).
  5. Install the parts in the reverse order of removal with a new O-ring (C).
About FixVault