FixVault
Home › Acura › 2009 › TSX Automatic › Repair and Diagnosis › Engine Performance › System › PGM-FI System (4-CYL) › ECT Sensor 2 Replacement

ECT Sensor 2 Replacement

  1. Remove the splash shield (see FRONT SPLASH SHIELD REPLACEMENT )
  2. Dram the engine coolant (see COOLANT CHECK )
  3. Disconnect the ECT sensor 2 connector (A), then remove ECT sensor 2 (B)
    Fig 1: ECT Sensor 2 Connector, ECT Sensor 2, O-Ring With Torque Specification
    G05992364Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install ECT sensor 2 with a new O-ring (C)
  5. Install the splash shield (see FRONT SPLASH SHIELD REPLACEMENT )
  6. Refill the radiator with engine coolant (see COOLANT CHECK )
About FixVault