FixVault
Home › Acura › 2009 › TSX Automatic › Repair and Diagnosis › Engine Performance › System › PGM-FI System (4-CYL) › Knock Sensor Replacement

Knock Sensor Replacement

  1. Remove the intake manifold (see INTAKE MANIFOLD REMOVAL AND INSTALLATION )
  2. Disconnect the knock sensor connector (A)
    Fig 1: Lnock Sensor Connector, Knock Sensor With Torque Specification
    G05992366Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the knock sensor (B)
  4. Install the parts in the reverse order of removal
About FixVault