FixVault
Home › Acura › 2009 › TSX Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission (4-CYL) › A/T Interlock System › Shift Lock Release, Release Spring, and Release Shaft Replacement

Shift Lock Release, Release Spring, and Release Shaft Replacement

  1. Remove the shift lever assembly (see SHIFT LEVER REMOVAL )
  2. Remove the shift lever knob (see SHIFT LEVER KNOB REPLACEMENT )
  3. Remove the A/T gear position indicator panel base (see SHIFT LEVER BOOT AND A/T GEAR POSITION INDICATOR PANEL BASE REPLACEMENT )
  4. Release the lock (A) of the shift lock release (B), then remove the shift lock release and the release spring (C)
    Fig 1: Releasing Lock
    G05993307Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Release the lock (D) of the shift lock release shaft (E), and remove the release shaft (F)
  6. Replace tie shift lock release, the release spring, or the release shaft
  7. Install the shift lock release spring (A) in the shift lock release (B)
    Fig 2: Identifying Shift Lock Release Spring, Shift Lock Release And Shift Lock Release Shaft
    G05993308Courtesy of AMERICAN HONDA MOTOR CO., INC.
  8. Install the shift lock release shaft (C) in the shift lever, and install the shift lock release and the release spring on the release shaft end
  9. Make sure that the release spring end (A) is installed in the shift lock release (B), and the other end (C) of the release spring is on the stop (D)
    Fig 3: Identifying Spring End, Shift Lock Release, End And Stop
    G05993309Courtesy of AMERICAN HONDA MOTOR CO., INC.
  10. Install the A/T gear position indicator panel base (see SHIFT LEVER BOOT AND A/T GEAR POSITION INDICATOR PANEL BASE REPLACEMENT )
  11. Install the shift lever knob (see SHIFT LEVER KNOB REPLACEMENT )
  12. Install the shift lever assembly (see SHIFT LEVER INSTALLATION )
About FixVault