FixVault
Home › Acura › 2010 › RDX 2.3 TB2 › Repair and Diagnosis › Engine Performance › System › PGM-FI System › ECT Sensor 2 Replacement

ECT Sensor 2 Replacement

  1. Remove the splash shield.
  2. Drain the engine coolant (see COOLANT CHECK ).
  3. Disconnect the ECT sensor 2 connector (A).
    Fig 1: ECT Sensor 2, Connector And O-Ring With Torque Specifications
    G08059500Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove ECT sensor 2 (B).
  5. Install the parts in the reverse order of removal with a new O-ring (C).
  6. Refill the radiator with engine coolant (see COOLANT CHECK ).
About FixVault