FixVault
Home › Acura › 2010 › RDX 2.3 TB2 › Repair and Diagnosis › Engine Performance › System › VTEC/VTC › Rocker Arm Oil Pressure Switch Removal/Installation

Rocker Arm Oil Pressure Switch Removal/Installation

  1. Remove the rocker arm oil control valve (see ROCKER ARM OIL CONTROL VALVE REMOVAL/INSTALLATION  ).
  2. Remove the rocker arm oil pressure switch (A).
    Fig 1: Rocker Arm Oil Pressure Switch With Torque Specifications
    G08059595Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the parts in the reverse order of removal with a new O-ring (B).
About FixVault