FixVault
Home › Acura › 2010 › RL › Repair and Diagnosis › Body & Frame › Mirrors › Power Mirrors › Power Mirror Actuator Test › Notes

Power Mirror Actuator Test: Notes

NOTE: The power mirror actuator can be tested by using the HDS and following these steps:
  • Select BODY ELECTRICAL from the SYSTEM SELECT menu.
  • Select FUNCTION TEST, and then the appropriate power mirror function test.
  1. Remove the front door sash inner trim (see FRONT DOOR SASH INNER TRIM REPLACEMENT ), and the door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
  2. Disconnect the 16P connector (A) from the power mirror actuator (B).
    Fig 1: Identifying 16P Connector And Power Mirror Actuator
    G06162902Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check actuator operation by connecting power and ground according to the table.
    Fig 2: Power Mirror Actuator Terminals Continuity Reference Chart
    G06162903Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the mirror fails to work properly, replace the mirror actuator.
About FixVault