Passenger's Power Window Motor Test

Remove the passenger's power window switch (see FRONT PASSENGER'S ), and disconnect the connector (A).

Fig 1: Identifying Passenger's Power Window Switch Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the motor in each direction by connecting battery power and ground to the passenger's power window switch 14P connector according to the table.

Fig 2: Passenger's Power Window Switch Terminals Continuity Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, go to step 4. If the motor is OK, do each power window switch input test.
- Front passenger's (see FRONT PASSENGER'S POWER WINDOW SWITCH INPUT TEST )
- Left rear (see LEFT REAR POWER WINDOW SWITCH INPUT TEST )
- Right rear (see RIGHT REAR POWER WINDOW SWITCH INPUT TEST )
Disconnect the 6P or 2P connector from the passenger's power window motor.
Check for continuity between the passenger's power window switch 14P connector terminals No. 8 and No. 14 and passenger's power window motor 6P (or 2P) connector terminals No. 1 and No. 4 (or No. 2) respectively.
Front passenger's door

FRONT PASSENGERS POWER WINDOW SWITCH 14P CONNECTOR

terminal No. 8

terminal No. 14

FRONT PASSENGERS POWER WINDOW MOTOR 4P CONNECTOR

terminal No. 4

terminal No. 1

Fig 3: Checking Continuity Between Passenger's Power Window Switch 14P Connector Terminals 8 And Motor 6P Connector Terminals 4
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Rear door

REAR POWER WINDOW SWITCH 14P CONNECTOR

terminal No. 8

terminal No. 14

REAR POWER WINDOW MOTOR 2P CONNECTOR

terminal No. 2

terminal No. 1

Fig 4: Checking Continuity Between Rear Power Window Switch 14P Connector Terminals 8 And Motor 2P Connector Terminals 2
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the wire harness is OK, replace the appropriate power window motor.
- Front passenger's power window motor (see FRONT DOOR GLASS AND REGULATOR REPLACEMENT )
- Rear power window motor (see REAR DOOR GLASS AND REGULATOR REPLACEMENT )