Without Navigation

NOTE:

Put on gloves to protect your hands
Take care not to scratch the dashboard and related parts
Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage

Remove the dashboard center vent (see DASHBOARD CENTER VENT REMOVAL/INSTALLATION )
Carefully remove the screws from the audio-HVAC display unit (A)

Fig 1: Identifying Audio-HVAC Display Unit With Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Pull out the audio-HVAC display unit Then disconnect the connector (A) from the audio-HVAC display unit

Fig 2: Disconnecting Connector From Audio-HVAC Display Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the audio-HVAC display unit in the reverse order of removal