FixVault
Home › Acura › 2011 › TL Base › Repair and Diagnosis › Body & Frame › Door Locks › Keyless/Power Door Locks/Security System › Keyless Buzzer Replacement

Keyless Buzzer Replacement

  1. Remove the rear bumper (see REAR BUMPER REMOVAL/INSTALLATION )
  2. Disconnect the 2P connector (A) from the keyless buzzer (B)
    Fig 1: Identifying 2P Connector And Keyless Buzzer
    G05988886Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the buzzer from the bracket
  4. Install the buzzer in the reverse order of removal
About FixVault