Trunk Lid Release Actuator Test
- Open the trunk lid, and remove the trunk lid trim (see
TRIM REMOVAL/INSTALLATION - TRUNK LID
)
- Disconnect the 3P connector (A) from the trunk lid latch switch/trunk release actuator (B)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Check actuator operation by connecting power to the terminal No 3 and ground to terminal No 2 momentarily to prevent damage to the actuator The actuator should work
- If the actuator does not work, replace the trunk lid latch switch/release actuator assembly (see
TRUNK LID LATCH REPLACEMENT
)