Drive Belt Inspection

WARNING: This page is about a different car, the 2010 Acura TL and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine compartment covers (see ENGINE COMPARTMENT COVER REPLACEMENT )
Inspect the belt for cracks or damage If the belt is cracked or damaged, replace it (see DRIVE BELT REPLACEMENT )
Check that the position of the auto-tensioner indicator (A) is within the standard range (B) as shown If it is out of the standard range, replace the drive belt (see DRIVE BELT REPLACEMENT )

Fig 1: Identifying Auto-Tensioner Indicator With Standard Range
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the engine compartment covers (see ENGINE COMPARTMENT COVER REPLACEMENT )