Tensioner Pulley Replacement

WARNING: This page is about a different car, the 2010 Acura TL and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the auto-tensioner (see DRIVE BELT AUTO-TENSIONER REPLACEMENT )
Remove the pulley bolt (A) (left-hand threads), and remove the tensioner pulley (B)

Fig 1: Tensioner Pulley And Pulley Bolt With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the tensioner pulley in the reverse order of removal