Motor Test

NOTE: SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or servicing.

Remove the front seat-back cover (see FRONT SEAT-BACK COVER REPLACEMENT ).
Disconnect the 2P connector (A) from the lumbar support motor.

Fig 1: Identifying Lumbar Support 2P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the motor by applying battery power and ground to the terminals.

Fig 2: Motor Continuity Reference Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, replace it (see FRONT SEAT LUMBAR SUPPORT REPLACEMENT ).