FixVault
Home › Acura › 2012 › MDX › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Climate Control › Recirculation Control Motor Replacement › Removal

Recirculation Control Motor Replacement: Removal

  1. Remove the glove box (see GLOVE BOX REMOVAL/INSTALLATION ).
  2. Disconnect the 7P connector (A) from the recirculation control motor (B). Remove the self-tapping screws and the recirculation control motor from the blower unit.
    Fig 1: Locating 7P Connector And Recirculation Control Motor
    G08058030Courtesy of AMERICAN HONDA MOTOR CO., INC.
About FixVault