Speaker Test/Replacement: Subwoofer
- Remove the rear shelf (see
TRIM REMOVAL/INSTALLATION - REAR SHELF AREA
).
- Remove the trunk upper trim panel (see
TRIM REMOVAL/INSTALLATION - TRUNK AREA
).
- Disconnect the 2P connector (A), then remove connector clip (B) from the subwoofer duct (C).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the nuts (D) and the subwoofer (E).
- Measure the resistance between the terminals No. 1 and No. 2. There should be about 2 Ω.
- If the resistance is not as specified, replace the subwoofer.