FixVault
Home › Acura › 2012 › RL › Repair and Diagnosis › Accessories & Equipment › Infotainment › Navigation System › DTC Troubleshooting › DTC 1307: DVD Read Error

DTC 1307: DVD Read Error

NOTE:
  • Check the vehicle battery condition first (see BATTERY TEST ).
  • Check any official Honda service website for more service information about the navigation system.
  • Before you troubleshoot, make sure to follow the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION  ).
  • Inspect the navigation DVD for scratches, damage.
  1. Check the navigation DVD.

    Is the navigation DVD the correct color and version for the vehicle? Is it scratch free? 

    YES  -Go to step 2.

    NO  -Replace the navigation DVD, and retest.

  2. Turn the ignition switch to ON (II).

    Is there a DVD error message? 

    YES  -Go to DVD SCREEN ERROR MESSAGES TROUBLESHOOTING  .

    NO  -Go to step 3.

  3. Clear the hard error code (see HOW TO CLEAR ERROR HISTORY  ).
  4. Turn the ignition switch to LOCK (0) then back to ON (II).
  5. Check for the hard error code (see HOW TO CHECK ERROR HISTORY (NAVIGATION DTCS)  ).

    Is DTC 1307 indicated? 

    YES  -Replace the navigation unit (see NAVIGATION UNIT REMOVAL/INSTALLATION  ).

    NO  -Intermittent failure, the system is OK at this time see How to identify navigation DVD versions, and how to inspect a DVD for damage (see EARLIEST DVD VERSION APPLICATION FOR EACH MODEL  ). If the vehicle repeatedly cones back with the navigation DTC, replace the navigation unit (see NAVIGATION UNIT REMOVAL/INSTALLATION  ).

About FixVault