FixVault

Power Door Locks/Keyless

  1. Check for B-CAN DTCs. If any B-CAN DTCs are indicated, troubleshoot and resolve them first.
  2. If the door lock system and the keyless operation do not work, troubleshoot the door locks first.
NOTE: The system does not function when the ignition switch is ON (II).
SYMPTOM TROUBLESHOOTING INDEX REFERENCE

Symptom Check Items Also check for
All the doors will not lock or unlock.(1)
  • An open or high resistance in the wire.
  • A short to ground wire.
  • A short to power in the wire.
-
Doors will not lock with the driver's door key cylinder, door lock switch or the remote.   -
Doors will not unlock with the driver's door key cylinder, door lock switch or the remote. -
Keyless operation does not work (LOCK, UNLOCK, PANIC). Customized settings in the ODO/trip display; see Owner's Manual for details.
Doors will not unlock with the transmitter, but will unlock with the door lock switch and the door key cylinder switch. -
Doors automatically relock 30 seconds after being unlocked with the transmitter even though a door has been opened. -
Only driver's door will unlock or door locks relock immediately after unlocking with the remote. Driver's door lock knob switch test. See DOOR LOCK KNOB SWITCH TEST .  
Doors will not Lock or Unlock with the remote, but will Lock/Unlock with door lock switch or door key cylinder switch. -
The horn does not sound when PANIC button on the transmitter pressed. Customized settings in the ODO/trip display; see Owner's Manual for details.
Trunk will not release. -
XX
Keyless operation will work even though the ignition key is in the ignition switch.
-
(1) If only one door is not working properly, check that door's lock actuator first, then check the other items listed in this table.