Driver's Vent Panel Removal/Installation

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Acura Tool and Equipment Program; 888-424-6857

NOTE:

Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
Take care not to scratch the dashboard or the related parts.

Remove the instrument fascia (see INSTRUMENT FASCIA REMOVAL/INSTALLATION ).
Gently pull out the driver's vent panel (A) to detach the clips (B, C), then remove the panel.

Fig 1: Pulling Out Driver's Vent Panel
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the panel in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.