Removal (without SH-AWD)

Relieve the fuel pressure .
Remove the rear seat cushion (see REAR SEAT REMOVAL/INSTALLATION ).
Remove the access panel (A) from the floor.

Fig 1: Removing Access Panel From Floor (Without SH-AWD)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the fuel tank unit 4P connector (B).
Disconnect the quick-connect fitting (C) from the fuel tank unit.
Using the special tool, loosen the locknut (A).

Fig 2: Loosening Locknut Using Special Tool
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the locknut (A) and the fuel tank unit (B).

Fig 3: Identifying Locknut And Fuel Tank Unit

Courtesy of AMERICAN HONDA MOTOR CO., INC.