FixVault
Home › Acura › 2012 › TL Base › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Climate Control › Receiver/Dryer Desiccant Replacement

Receiver/Dryer Desiccant Replacement

NOTE: Install the receiver/dryer as quickly as possible to prevent the system from absorbing moisture from the air.
  1. Remove the A/C condenser (see A/C CONDENSER REPLACEMENT  ).
  2. Remove the cap (A) from the bottom of the A/C condenser. Remove the O-ring (B) and the desiccant (C).
    Fig 1: Cap, O-Ring And Desiccant With Torque Specifications
    G08071099Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the receiver/dryer in the reverse order of removal, and note these items:
    • If you are installing a new desiccant, add refrigerant oil (DENSO ND-OIL 8) (see A/C REFRIGERANT OIL REPLACEMENT  )
    • Replace the O-rings with new ones, and apply a thin coat of refrigerant oil (DENSO ND-OIL 8) before installing them. Be sure to use the correct O-rings for HFC-134a (R-134a) to avoid leakage.
    • Install the cap to the specified torque. It is made of plastic and can be easily stripped.
About FixVault