FixVault
Home › Acura › 2012 › TL Base › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Climate Control › Recirculation Control Motor Replacement › Installation

Recirculation Control Motor Replacement: Installation

  1. Make sure the damper lever pins in the motor lever are visible through the holes.
    Fig 1: Checking Damper Lever Pins In Motor Lever Through Holes
    G08071145Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. While holding the recirculation control motor (A), install the self-tapping screws and connect the 7P connector (B).
    Fig 2: Identifying Recirculation Control Motor And 7P Connector
    G08071146Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Reinstall the climate control unit.
  4. After installation, make sure the motor runs smoothly.
About FixVault