FixVault

Audio Remote Switch Test

  1. Remove the audio remote, HFL-navigation voice control switch or the audio remote-HFL switch (see STEERING WHEEL DISASSEMBLY/REASSEMBLY ).
  2. Measure the resistance between terminals No. 11 and No. 12 in each switch position according to the table.
    Fig 1: Identifying Audio Remote Switch Connector Terminals
    G08077460Courtesy of AMERICAN HONDA MOTOR CO., INC.
    Position Resistance
    No button pressed About 10 kΩ
    MODE About 3.7 kΩ
    CH (+) About 1.7 kΩ
    CH (-) About 775 Ω
    ↑ (VOL. UP) About 357 Ω
    ↓ (VOL. DOWN) About 100 Ω
  3. If the resistance is not as specified, replace the switch.