VSA Modulator-Control Unit Connector for Inputs and Outputs (2016-18)

VSA Modulator-Control Unit Inputs and Outputs for 38P Connector

Courtesy of HONDA, U.S.A., INC.

Terminal number	Terminal sign	Description
1	GND	Ground for the pump motor
2	+B ABS/VSA MTR	Power source for the motor relay
3	GND	Ground for the VSA modulator-control unit
4	+B ABS/VSA FSR	Power source for the fail-safe relay
5	VAC2	Detects brake booster pressure sensor B signal
6	Not used	---
7	Not used
8	Not used
9	FR L ABS SNSR-	Detects left-front wheel speed sensor signal
10	Not used	---
11	Not used	---
12	SVCC2	Power source for brake booster pressure sensor B
13	FR R ABS SNSR-	Detects right-front wheel speed sensor signal
14^*	BRK LAMP	Drives the brake light relay
15	Not used	---
16	Not used
17	Not used
18	Not used
19	SGND1	Ground for brake booster pressure sensor A
20	Not used	---
21	FR L ABS SNSR+	Detects left-front wheel speed sensor signal
22	RR L ABS SNSR-	Detects left-rear wheel speed sensor signal
23	RR R ABS SNSR+	Detects right-rear wheel speed sensor signal
24	FR R ABS SNSR+	Detects right-front wheel speed sensor signal
25	Not used	---
26	F CAN-L	F-CAN communication circuit
27	VAC1	Detects brake booster pressure sensor A signal
28	Not used	---
29	Not used	---
30	SVCC1	Power source for brake booster pressure sensor A

*: With ACC

Terminal number	Terminal sign	Description
31	Not used	---
32	SGND2	Ground for brake booster pressure sensor B
33	RR L ABS SNSR+	Detects left-rear wheel speed sensor signal
34^*	STOP SW	Detects brake light relay
35	RR R ABS SNSR-	Detects right-rear wheel speed sensor signal
36	IG1 VSA/ABS	Power source for activating the system
37	Not used	---
38	F CAN-H	F-CAN communication circuit

*: With ACC