VSA Modulator-Control Unit Inputs and Outputs for 47P Connector (Connector Disconnected)
CONNECTOR TERMINALS DESCRIPTION
| Terminal number | Wire color | Terminal sign | Description | Signal |
|---|---|---|---|---|
| 1 | RED | MR+B | Power source for the motor relay | Battery voltage (about 12 V) at all times |
| 5 | ORN | SVCC | Power source for the steering angle sensor | -- |
| 8 | WHT | IG1 | Power source for activating the system | With ignition switch ON (II): battery voltage (about 12 V) |
| 10 | LT BLU | K-LINE | Communication with HDS | Pulse voltage (digital signal) |
| 12 | WHT | F-CAN H | F-CAN communication circuit | -- |
| 13 | RED | F-CAN L | F-CAN communication circuit | |
| 16 | BLK | GND | Ground for the VSA modulator-control unit | Continuity to ground |
| 30 | BLU | STR-Z | Detects steering angle sensor signal | -- |
| 32 | WHT | FSR+B | Power source for the fail-safe relay | Battery voltage (about 12 V) at all times |
| 33 | PUR | FR-GND | Detects right-front wheel speed sensor signal | -- |
| 34 | LT GRN | FR+B | Detects right-front wheel speed sensor signal |
CONNECTOR TERMINALS DESCRIPTION
| Terminal number | Wire color | Terminal sign | Description | Signal |
|---|---|---|---|---|
| 36 | BLU | RL+B | Detects left-rear wheel speed sensor signal | -- |
| 37 | RED | RL-GND | Detects left-rear wheel speed sensor signal | |
| 38 | LT GRN | STR-B | Detects steering angle sensor signal | |
| 39 | RED | WEN | Detects write enable signal | |
| 40 | BRN | SGND | Ground for the steering angle sensor | |
| 41 | GRN | STR-A | Detects steering angle sensor signal | |
| 42 | PUR | RR-GND | Detects right-rear wheel speed sensor signal | |
| 43 | PNK | RR+B | Detects right-rear wheel speed sensor signal | |
| 45 | ORN | FL+B | Detects left-front wheel speed sensor signal | |
| 46 | GRN | FL-GND | Detects left-front wheel speed sensor signal | |
| 47 | BLK | MR-GND | Ground for the pump motor | Continuity to ground |