Fuel Pressure Regulator Replacement
- Remove the fuel tank unit (see REMOVAL
).
- Remove the reservoir (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the bracket (B).
- Remove the fuel pressure regulator (C).
- Install the parts in the reverse order of removal with new O-rings (D) and a new bracket. When installing the fuel tank unit, align the marks on the unit and the fuel tank (see INSTALLATION
).
NOTE:
- Coat the O-rings with clean engine oil; do not use any other oil or fluid.
- Use all supplied new parts in the pressure regulator replacement kit.
- Do not pinch the O-rings during installation.