Engine Start/Stop Switch Test (2013-18): Test

Driver's Inner Dashboard Trim - Remove

1. Remove the driver's inner dashboard trim .

Engine Start/Stop Switch - Test

Courtesy of HONDA, U.S.A., INC.HONDA, U.S.A., INC.

1. Check the engine start/stop switch (A) for continuity and voltage according to the table.

NOTE:

When an LED is located between terminals, check if the LED lights up by connecting power and ground to the LED.
Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).

2. If the result is not as specified, replace the engine start/stop switch .

Driver's Inner Dashboard Trim - Install

1. Install the driver's inner dashboard trim .