DTC P16FB
DTC P16FB : PCM Internal Circuit Malfunction (Starter Control)
NOTE:
Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information
.
| DTC Description | Confirmed DTC | Pending DTC |
|---|---|---|
| P16FB PCM Internal Circuit Malfunction (Starter Control) |
DTC (PGM-FI)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Start the engine.
-4. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC P16FB PCM Internal Circuit Malfunction (Starter Control) Is DTC P16FB indicated?
YES
The failure is duplicated. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or substitute a known-good PCM , then recheck. If DTC P16FB goes away and the PCM was substituted, replace the original PCM .
NO
Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the PCM. If the on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the on-board snapshot .