VSA Off Mode

When the VSA OFF switch is pressed, the VSA OFF indicator will illuminate and the VSA will go onto OFF mode.

During VSA OFF mode:

• If the TCS activates, the VSA indicator blinks while the VSA OFF indicator is still on.
• The ability to gain traction on loose sand and deep snow is increased by terminating the TCS function at low speeds.
• During a standing start from varying road surfaces under the left and right side of the vehicle, the TCS function helps gain traction.
• When the vehicle is on a lift while being serviced and its tires are not in contact with any surface, the wheel speed will not exceed 31 mph (50 km/h).
• The TCS function is fully disabled when the VSA maintenance mode is activated.

Courtesy of HONDA, U.S.A., INC.

VSA Maintenance Mode 

Entering the VSA maintenance mode is necessary whenever the vehicle is on a lift or two-wheel dynamometer, and wheel spin can reach speeds above 31 mph (50 km/h).

Refer to the service information for removal and installation concern to enter VSA maintenance mode.