Repair Procedure

How to use this manual .

Courtesy of HONDA, U.S.A., INC.

: Torque, N.m (lbf.ft)

: Replace

: Warning/Caution

: Inspection/Adjustment

*: Learning

: ■SPL Tool

: Required Removal

1. A.-

   Courtesy of HONDA, U.S.A., INC.

2. B.-

   Courtesy of HONDA, U.S.A., INC.

3. C.-

   Sub-Procedure 

   Removal 

   • Refer to the figure. (Figure 1 and 2)

   Figure 1 (Left side) 

   Courtesy of HONDA, U.S.A., INC.

   Figure 2 (Right side) 

   Courtesy of HONDA, U.S.A., INC.

   Installation 

   NOTE:

   • Prior to the installation of the removed front inner fender, make sure that the air vents are free of mud and debris.
4. D.-

   Key Information 

   Do the following before starting your work.

   Remove: 

   • Front Inner Fender (as needed)
   • Right side: Washer Tank

   Sub-Procedure 

   Removal 

   • Refer to the figure.

   Courtesy of HONDA, U.S.A., INC.

5. E.-

   Courtesy of HONDA, U.S.A., INC.

6. F.-

   Sub-Procedure 

   Removal 

   1. Apply protective tape (a) as shown. (Figure 1)

   Figure 1 

   Courtesy of HONDA, U.S.A., INC.

   2. Refer to the figure 2.

   Figure 2 

   Courtesy of HONDA, U.S.A., INC.

   Installation 

   • Refer to the figure 3.

   Figure 3 

   Courtesy of HONDA, U.S.A., INC.

7. G.-

   Courtesy of HONDA, U.S.A., INC.