Confirmation Procedure
Perform the following procedures in order. If the failure is duplicated, the confirmation procedure is completed.
- Procedure 1
-
- Insert the emergency fuel funnel into the fuel filler neck - Refer to: Fuel Pressure Test(2.0L Engine)
or Fuel Pressure Test(3.0L Engine)
or Fuel Pressure Relieving
.NOTE: The emergency fuel funnel is stored in the trunk tool box.
- Turn the vehicle to the ON mode.
- If the HDS [FTP Sensor Voltage] value is more than 3.62 V, the failure is duplicated.
- Insert the emergency fuel funnel into the fuel filler neck - Refer to: Fuel Pressure Test(2.0L Engine)
or Fuel Pressure Test(3.0L Engine)
or Fuel Pressure Relieving
.
- Procedure 2
-
- Start the engine.
- Hold the engine speed at 3, 000 rpm without load (in P or N) until the radiator fan comes on, then let it idle.
- Monitor the HDS [OBD STATUS (PGM-FI)] for DTC P0450.