DTC Troubleshooting: P2195 (2.0L Engine): Inspection

MAF sensor/IAT sensor 1 Visual Inspection 

Test Procedure 

• Preparation
• • MAF sensor/IAT sensor 1: removed

• Procedure
• • Check for dirt or debris in MAF sensor/IAT sensor 1.

• Normal Conditions
• • There is no dirt or debris.

Results 

• If it is abnormal, there is a problem with MAF sensor/IAT sensor 1.

A/F Sensor (Sensor 1) Installation Inspection 

Test Procedure 

• Procedure
• • Check A/F sensor (Sensor 1) for connecting conditions or loose.

• Normal Conditions
• • Connecting condition is OK, and there is no loose.

Results 

• If it is normal, there is a problem with A/F sensor (Sensor 1).
• If it is abnormal, there is a problem with incorrect installation of A/F sensor (Sensor 1).
  NOTE: Reinstall A/F sensor (Sensor 1) correctly.

PCM Inspection 

Test Procedure 

• If the other inspection item (s) indicated a normal condition, then it is determined that the remaining PCM is the cause.

Results 

• There is a problem with the PCM.