DTC Troubleshooting: U0400-66 (VSA Control Unit): Notes

DTC U0400-66  : Incorrect Signal Detection (External Intrusion)

How to use this service information .

NOTICE: 

• Before you troubleshoot, review the how to troubleshoot .
• Confirm with the customer whether an aftermarket unit is connected. If it is connected, thoroughly inspect the location and the bus line where the unit is installed.
• If a loss of communication DTC is indicated in the CAN gateway system, troubleshoot the indicated DTC first.
• • -

    Network Communications [CAN gateway]: Go to the indicated DTC's troubleshooting - Refer to: .